Skanto | Solar Fountain Pump

Solar Fountain Pump 

OPERATING INSTRUCTIONS

1. Remove the film covering the solar panel before use;
2. ​Please install the pipes and nozzles after pressing the pump into the water and letting it spray water for 3 seconds, and the nozzle should be above the water.
3. The water should be at least 1 inch (2,5 cm) deep and clean. If the water is not deep enough, the pump will not be able to pump in and spray out water.
4. If your fountain stops working, you can move it to a shaded area to cool it down. Then you have 2 ways to reset it. You can charge it under the sun outside the water for 2 hours. Alternatively, you can tap the center of the solar panel or gently tap it to reset it.
5. Built-in battery allows it to work continuously on sunny days and still work for about 1 hour when there is no sunlight.

WARM TIPS:

• If you don't want it to float, you can fix it with the suction cups on the bottom or use an extra fishing line.
• Please clean the pump regularly to ensure the fountain works properly.
• Do not let the pump run without water for long periods, otherwise its lifespan will be shortened.